Vibrant Crème to Powder Blush

Released By Sandream Specialties

Vibrant Crème to Powder Blush
Ingredients
%

Phase A

  • Floramac 10 (Floratech) (Ethyl macadamiate)
  • 26.20
  • PureSyn 2 (Sandream Impact) (Hydrogenated polydecene)
  • 13.53
  • Fancol ID-CG (Elementis) (Isododecane)
  • 4.78
  • Jeesilc PS-PTVL (Jeen) (Phenyltrimethicone, dimethicone/vinyl dimethicone crosspolymer)
  • 3.54
  • Sansil D308 (Sandream) (Dimethicone/vinyl dimethicone crosspolymer)
  • 2.00

Phase B

  • Micropoly 250S (Micro Powders) (Polyethylene)
  • 4.82
  • Candellila Wax (Strahl & Pitsch) (Euphorbia cerifera (candellila) wax)
  • 3.12
  • Microcrystalline Wax (Strahl & Pitsch) (Microcrystalline wax)
  • 2.12
  • Synchrowax HR-C (Croda) (Tribehenin)
  • 0.66

Phase C

  • Fiesta Precious Coral FCM-PC7 (Sandream)(Synthetic fluor-)phlogopite, TiO2, red 40, tin oxide, triethoxycaprylylsilane
  • 17.00
  • PMMA H (Brenntag) (Polymethyl methacrylate)
  • 7.25
  • SanTalc 511 (Sandream Impact) (Talc)
  • 5.00
  • SanSilica 307 (Sandream Impact) (Silica)
  • 4.62

Phase D

  • Benzophenone-3 (Sandream Impact) (Benzophenone-3)
  • 2.72
  • Euxyl PE 9010 (Schulke) (Phenoxyethanol, ethylglycerin)
  • 1.32
  • Vitamin E (Sandream Impact) (Tocopheryl acetate)
  • 1.32

Procedure

Preheat phase A to 90°C in a glass beaker and propeller mix until solution is dissolved and homogeneous. Mix phase B in a separate beaker at 95°C and stir until completely melted. Slowly add phase B to A and mix under propeller agitation until fully incorporated and uniform. Add phase C to A & B and slowly combine using a homogenizer. Premix phase D in a separate beaker at 70°C until uniform then add to phase A, B, C. Continue mixing until a smooth, creamy and homogeneous solution is present. Lower temperature of the batch to 70°C and pour into desired pans.

More Information

Sandream Impact Website: www.sandreamimpact.com

Request more information from Sandream Specialties